#        routerboard: yes
#              model: 951G-2HnD
#      serial-number: 4F43045E20E0
#      firmware-type: ar9344
#   factory-firmware: 3.17
#   current-firmware: 6.46
#   upgrade-firmware: 6.46
# 
#             channel: stable
#   installed-version: 6.46
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = 3E75-0AYA
#
# model = 951G-2HnD
# serial number = 4F43045E20E0
/interface bridge
add name=br_mgmt protocol-mode=none
add name=br_robert protocol-mode=none
add name=br_server protocol-mode=none
add name=br_tobias protocol-mode=none
/interface wireless
# managed by CAPsMAN
# channel: 2412/20/gn(10dBm), SSID: wifis.org/ke/bertling, CAPsMAN forwarding
set [ find default-name=wlan1 ] ssid=MikroTik
/interface ethernet
set [ find default-name=ether1 ] name=eth1_kg speed=100Mbps
set [ find default-name=ether2 ] speed=100Mbps
set [ find default-name=ether3 ] speed=100Mbps
set [ find default-name=ether4 ] speed=100Mbps
set [ find default-name=ether5 ] speed=100Mbps
/interface vlan
add interface=eth1_kg name=vlan1 vlan-id=1
add interface=eth1_kg name=vlan10 vlan-id=10
add interface=eth1_kg name=vlan42 vlan-id=42
add interface=eth1_kg name=vlan50 vlan-id=50
add interface=eth1_kg name=vlan51 vlan-id=51
add interface=eth1_kg name=vlan52 vlan-id=52
add interface=eth1_kg name=vlan60 vlan-id=60
add interface=eth1_kg name=vlan90 vlan-id=90
add interface=eth1_kg name=vlan99 vlan-id=99
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/routing bgp instance
set default disabled=yes
/routing ospf instance
set [ find default=yes ] disabled=yes
/snmp community
set [ find default=yes ] addresses=172.24.0.0/16 name=jie6Wao5weeSahs
add addresses=172.24.1.0/24,172.24.10.0/24 authentication-password=nUTIRozDeJMiQ2Goj8BR authentication-protocol=SHA1 encryption-password=nUTIRozDeJMiQ2Goj8BR encryption-protocol=AES name=monitor security=private
/interface bridge port
add bridge=br_mgmt interface=vlan1
add bridge=br_server interface=vlan10
add bridge=br_robert interface=vlan42
add bridge=br_tobias interface=vlan51
add bridge=br_tobias interface=ether2
add bridge=br_tobias interface=ether3
add bridge=br_tobias interface=ether4
add bridge=br_tobias interface=ether5
/interface wireless cap
# 
set caps-man-addresses=172.24.1.97 enabled=yes interfaces=wlan1
/ip address
add address=172.24.1.96/24 interface=br_mgmt network=172.24.1.0
add address=172.24.10.96/24 interface=br_server network=172.24.10.0
add address=172.24.42.96/24 interface=br_robert network=172.24.42.0
/ip dns
set servers=172.24.10.11,172.24.10.12
/ip route
add distance=1 gateway=172.24.1.1
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/snmp
set contact="Robert Einsle <robert@einsle.de" enabled=yes location=Kempten
/system clock
set time-zone-name=Europe/Berlin
/system identity
set name=mt-og
/system ntp client
set enabled=yes primary-ntp=172.24.10.11 secondary-ntp=172.24.10.12
/tool romon
set enabled=yes id=4C:5E:0C:70:A2:10 secrets=78f244b59c