# routerboard: yes # model: CRS109-8G-1S-2HnD # serial-number: 522D04EAB949 # firmware-type: ar9344 # factory-firmware: 3.19 # current-firmware: 6.45.2 # upgrade-firmware: 6.45.2 # # channel: stable # installed-version: 6.45.2 # # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = A0ZE-2DFY # # model = CRS109-8G-1S-2HnD # serial number = 522D04EAB949 /interface bridge add name=br_brigitte protocol-mode=none add name=br_mgmt protocol-mode=none add name=br_robert protocol-mode=none add name=br_server protocol-mode=none /interface ethernet set [ find default-name=ether1 ] name=eth1_kg set [ find default-name=ether2 ] name=eth2_gamer42 set [ find default-name=ether3 ] name=eth3_lappi72 set [ find default-name=ether4 ] name=eth4_mawoh set [ find default-name=ether5 ] name=eth5_gelb set [ find default-name=ether6 ] name=eth6_rot set [ find default-name=ether7 ] name=eth7_blau set [ find default-name=ether8 ] name=eth8_weiss /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik /interface vlan add interface=eth1_kg name=eth1_vlan1 vlan-id=1 add interface=eth1_kg name=eth1_vlan10 vlan-id=10 add interface=eth1_kg name=eth1_vlan42 vlan-id=42 add interface=eth1_kg name=eth1_vlan50 vlan-id=50 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /interface bridge port add bridge=br_mgmt interface=eth1_vlan1 add bridge=br_robert interface=eth1_vlan42 add bridge=br_robert interface=eth2_gamer42 add bridge=br_robert interface=eth3_lappi72 add bridge=br_robert interface=eth4_mawoh add bridge=br_robert interface=eth5_gelb add bridge=br_robert interface=eth6_rot add bridge=br_robert interface=eth7_blau add bridge=br_robert interface=eth8_weiss add bridge=br_server interface=eth1_vlan10 add bridge=br_brigitte interface=eth1_vlan50 /ip address add address=172.24.42.94/24 interface=br_robert network=172.24.42.0 add address=172.24.1.94/24 interface=br_mgmt network=172.24.1.0 add address=172.24.10.94/24 interface=br_server network=172.24.10.0 /ip dhcp-client add dhcp-options=hostname,clientid disabled=no interface=eth1_kg /ip dns set servers=172.24.10.11,172.24.10.12 /ip route add distance=1 gateway=172.24.1.1 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /lcd interface pages set 0 interfaces=wlan1 /system clock set time-zone-name=Europe/Berlin /system identity set name=mt-bu /system ntp client set enabled=yes primary-ntp=172.24.10.11 /tool romon set enabled=yes id=4C:5E:0C:A4:9C:1D secrets=78f244b59c