# routerboard: yes # model: 951G-2HnD # serial-number: 4F43045E20E0 # firmware-type: ar9344 # factory-firmware: 3.17 # current-firmware: 6.45.1 # upgrade-firmware: 6.45.1 # # channel: stable # installed-version: 6.45.1 # # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # U user oxidized added admin write # policy # # software id = 3E75-0AYA # # model = 951G-2HnD # serial number = 4F43045E20E0 /interface bridge add name=br_mgmt protocol-mode=none add name=br_robert protocol-mode=none add name=br_server protocol-mode=none add name=br_tobias protocol-mode=none /interface wireless # managed by CAPsMAN # channel: 2412/20/gn(10dBm), SSID: wifis.org/ke/bertling, CAPsMAN forwarding set [ find default-name=wlan1 ] ssid=MikroTik /interface ethernet set [ find default-name=ether1 ] name=eth1_kg speed=100Mbps set [ find default-name=ether2 ] speed=100Mbps set [ find default-name=ether3 ] speed=100Mbps set [ find default-name=ether4 ] speed=100Mbps set [ find default-name=ether5 ] speed=100Mbps /interface vlan add interface=eth1_kg name=vlan1 vlan-id=1 add interface=eth1_kg name=vlan10 vlan-id=10 add interface=eth1_kg name=vlan42 vlan-id=42 add interface=eth1_kg name=vlan50 vlan-id=50 add interface=eth1_kg name=vlan51 vlan-id=51 add interface=eth1_kg name=vlan52 vlan-id=52 add interface=eth1_kg name=vlan60 vlan-id=60 add interface=eth1_kg name=vlan90 vlan-id=90 add interface=eth1_kg name=vlan99 vlan-id=99 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /routing bgp instance set default disabled=yes /routing ospf instance set [ find default=yes ] disabled=yes /snmp community set [ find default=yes ] addresses=172.24.0.0/16 name=jie6Wao5weeSahs add addresses=172.24.1.0/24,172.24.10.0/24 authentication-password=nUTIRozDeJMiQ2Goj8BR authentication-protocol=SHA1 encryption-password=nUTIRozDeJMiQ2Goj8BR encryption-protocol=AES name=monitor security=private /interface bridge port add bridge=br_mgmt interface=vlan1 add bridge=br_server interface=vlan10 add bridge=br_robert interface=vlan42 add bridge=br_tobias interface=vlan51 add bridge=br_tobias interface=ether2 add bridge=br_tobias interface=ether3 add bridge=br_tobias interface=ether4 add bridge=br_tobias interface=ether5 /interface wireless cap # set caps-man-addresses=172.24.1.97 enabled=yes interfaces=wlan1 /ip address add address=172.24.1.96/24 interface=br_mgmt network=172.24.1.0 add address=172.24.10.96/24 interface=br_server network=172.24.10.0 add address=172.24.42.96/24 interface=br_robert network=172.24.42.0 /ip dns set servers=172.24.10.11,172.24.10.12 /ip route add distance=1 gateway=172.24.1.1 /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /snmp set contact="Robert Einsle