# routerboard: yes # board-name: hAP ac # model: RouterBOARD 962UiGS-5HacT2HnT # serial-number: 673706FE47BB # firmware-type: qca9550L # factory-firmware: 3.31 # current-firmware: 6.45.5 # upgrade-firmware: 6.45.6 # # channel: stable # installed-version: 6.45.6 # # Flags: U - undoable, R - redoable, F - floating-undo # ACTION BY POLICY # # software id = BJZX-XMI3 # # model = RouterBOARD 962UiGS-5HacT2HnT # serial number = 673706FE47BB /interface bridge add name=br_lan protocol-mode=none add name=br_robert protocol-mode=none add name=br_server protocol-mode=none add name=br_voip protocol-mode=none /interface wireless # managed by CAPsMAN set [ find default-name=wlan1 ] ssid=MikroTik # managed by CAPsMAN set [ find default-name=wlan2 ] ssid=MikroTik /interface vlan add interface=br_lan name=vlan1 vlan-id=1 add interface=br_lan name=vlan10 vlan-id=10 add interface=br_lan name=vlan42 vlan-id=42 add interface=br_lan name=vlan60 vlan-id=60 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /interface bridge port add bridge=br_lan interface=sfp1 add bridge=br_voip interface=ether2 add bridge=br_robert interface=vlan42 add bridge=br_server interface=vlan10 add bridge=br_server interface=ether3 add bridge=br_voip interface=vlan60 /interface wireless cap # set caps-man-addresses=172.24.1.97 enabled=yes interfaces=wlan1,wlan2 /ip address add address=172.24.1.93/24 interface=vlan1 network=172.24.1.0 add address=172.24.42.93/24 interface=vlan42 network=172.24.42.0 add address=172.24.10.93/24 interface=vlan10 network=172.24.10.0 /ip dns set servers=172.24.10.11,172.24.10.12 /ip route add distance=1 gateway=172.24.1.1 /ip ssh set forwarding-enabled=remote /system clock set time-zone-name=Europe/Berlin /system identity set name=mt-eg /system ntp client set enabled=yes primary-ntp=172.24.10.11 secondary-ntp=172.24.10.12 /tool romon set enabled=yes id=6C:3B:6B:19:62:A8 secrets=78f244b59c